FREE WEBINAR | November 24: Join us for an introduction to CNC Machining.
Register Now!2026/11/12
•
2 minutes read
With our one-stop shop capabilities, you can complete your entire project with a single manufacturing partner, reducing latencies and accelerating project velocity.
One of the ways we can add permanent part marking to your custom parts is through machined engraving, sometimes called machined etching.
Machined engraving is great for labeling, serialization, branding and schematics.
It’s when we use a CNC mill to cut text, logos, or graphics directly into a part. As the mark is actually cut into the material itself, it’s permanent.
We can work with aluminum, stainless steel and cold-rolled steel, and machined engraving works across a range of finishes, including powder coating, anodizing and bare metal finishes.
We can also engrave plastics, but without the extra finishing.
For depth, our standard is 0.010 in (0.25 mm). That said, depth can vary depending on the material and any finish applied afterward.
When it comes to text size, for a single line, we recommend a minimum of 16-point font to keep things legible. If you’re going with a double line, bump that up to a minimum of 18-point font.
If you need a double line font smaller than 18-point, be mindful that the lines may start to blend together.
On the upper end, only the size of the machine limits you, and since we do machined engraving on all our machines, you have plenty of room to work with.
When it comes to engraving, we use two types of tooling, rigid and spring-loaded, depending on the situation.
Rigid tools are our go-to for surfaces we know are flat, like fully machined parts. They produce much clearer, more defined text.
Spring-loaded tools, on the other hand, are used when the surface isn’t flat – like sheet metal parts that require CNC machined engraving. The trade-off is that the spring-loaded tool produces a thinner, less defined feature than rigid engraving does.
We offer machined engraving across a variety of finishes. For aluminum, we can engrave on smooth polyester powder coat, both before and after painting. Just keep in mind that if you engrave before applying the powder coat, you won’t get a lot of contrast once that powder coat is applied.
We can also engrave on a grained finish after brushing, bare metal with no finish, or anodized aluminum, either before or after anodizing. Just keep in mind that if you engrave after anodizing, the part will no longer be corrosion resistant.

For stainless steel and cold-rolled steel, we can engrave on smooth polyester powder coat after painting. Again, flat parts work best here. We can also engrave on a grained finish after brushing, or directly on bare metal with no finish at all.
One last note: if your application requires MIL-STD-130 permanent part marking, machined engraving is recommended.
Contact one of our friendly and knowledgeable account managers to get started with us today.
Contact Us Today